Standalone pelletizing equipment for sawdust and prepared biomass feedstock.
Technical configuration is confirmed only after reviewing your raw material and project requirements.
The standalone wood pellet machine converts prepared wood powder and sawdust into biomass fuel pellets. Available models cover approximately 1–4 TPH per machine. Final selection depends on raw material type, particle size, moisture content, required pellet diameter and hourly capacity.
This industrial wood pellet mill is selected from prepared feedstock, moisture, pellet diameter and required hourly output, whether used alone or in a complete biomass pellet line.
Fields not supplied are marked TBC and will be confirmed during technical communication.
| Parameter | Available information |
|---|---|
| Capacity | 1–4 TPH per machine, depending on model and raw material |
| Feedstock | Prepared sawdust or wood powder |
| Feedstock moisture | TBC after raw material evaluation |
| Pellet diameter | TBC by die selection |
| Main motor power | TBC by model |
To select a model, confirm the feedstock type, input particle size, moisture, target pellet diameter, required hourly capacity and available power. Published capacity ranges are general; actual output depends on the material and selected model.
A pellet machine requires prepared sawdust or wood powder rather than whole roundwood or coarse chips. Model selection starts with feedstock type, particle size, moisture, required pellet diameter and hourly output. If the raw material is wet or oversized, drying and hammer-mill grinding must be included before pelletizing.
Send the material type, particle size and moisture instead of only the raw log description.
Confirm pellet diameter, intended use and required hourly capacity.
State whether the machine will replace an existing unit or join a new complete line.
Contact us if your application needs a different process or configuration.
Sawdust, Prepared wood powder, Wood residues after grinding, Selected agro-forestry residues
1–4 TPH per machine, depending on model and raw material
The standalone wood pellet machine converts prepared wood powder and sawdust into biomass fuel pellets. Available models cover approximately 1–4 TPH per machine. Final selection depends on raw material type, particle size, moisture content, required pellet diameter and hourly capacity.
Send raw material photos or video, maximum size, moisture, hourly capacity, final product, country and WhatsApp or email.
Send photos or video of your raw material together with the required capacity and final product.